General Instruments 2710R
Specifications
IF Specifications
IF Frequency 0.95 - 1.45 Ghz
IF Impedance 75 Ohm
2nd IF Bandwidth 27 Mhz at 3 db
2nd IF Frequency 479.5 Mhz
Threshold 6 db C/N minimum
Memory Capacity 40 Favorite Channels
56 Satellite Names
44 Pre-Programmed, 12 Extra
Memory Backup Time 3 Years
Video Specifications
De-Emphasis CCIR 405-1, 525 Lines Defeatable
Frequency Response +/- 2db 30 Hz to 3.58 Mhz
+/-3db 3.58 Mhz to 4.2 Mhz
Output Level 1 volt p-p
Output Impedance 75 Ohm
Output Polarity Negitive sync.
Audio Specifications
Subcarrier Frequency 5 to 8.5 Mhz selectable, 6.8 Mhz Preset
Frequency Response 50 Hz to 15 Khz, +/- 3db typical
Harmonic Distortion Less than 3%
Audio Separation 20db min.
Output Impedance Less than 1K Ohm
Output Level 3db's into 10K Ohm load
RF Re-Modulator
Channels 3 or 4 switchable
RF Output 69.5 db micro max.
RF Impedance 75 Ohm
Frequency Stability Quartz controlled
Composite Out
Output Level 1V p-p
Frequency Response +/- 1db at 30 Hz - 3.58 Mhz
+/- 3db at 3.58 Mhz - 4.2 Mhz
DG 8% max.
DP 8 Degrees max.
Polarization Control
Interface Servo motor
Adjustment continously
controllable from SKEW
Polarity TELSTAR or GALAXY
polarity switchable (V to H)
Power Specifications
Actuator 24 VDC 2.50 A max.
circuit breaker controlled
Sensor 12 VDC 100mA
Polarity Motor 6 VDC 250 mA max.
Main Unit 120 VAC 140 W internal fuse
controlled
Dimensions
Receiver 13 - 3/4" W x 13 - 3/4" D x 3" H
Remote Control 2 - 1/4" W x 5/8" D x 8 - 1/2" H